Search found 245 matches

by flyjets
Mon 02 Jul, 2012 9:28 pm
Forum: Show & Tell
Topic: M99 shooting 600 yards sub MOA
Replies: 7
Views: 5232

Re: M99 shooting 600 yards sub MOA

Hand loads with 750gr AMAX I measured the maximum length of my chamber and backed off 30 thousands as a starting point.

The only way to shoot one this length is to single feed each one if you have a M82.

I don't have my notes with me but I have published the load data on here before.

Ian
by flyjets
Wed 22 Feb, 2012 9:12 am
Forum: General Discussion
Topic: Lightening a .416 barrel
Replies: 2
Views: 1510

Re: Lightening a .416 barrel

There is way more to this then just removing materials.

Barrel harmonics are going to come into play and I advise not proceeding with this idea.

It's not a simple matter of just Fluting the barrel if extreme Accuracy is also a goal.

Ian
by flyjets
Tue 13 Sep, 2011 8:27 pm
Forum: Show & Tell
Topic: 2 mile shooting -3500 yards
Replies: 3
Views: 4402

Re: 2 mile shooting -3500 yards

Moutain

I always w2anted that old Swiss range Finder in the last photo.

Ian
by flyjets
Sun 11 Sep, 2011 5:09 pm
Forum: .416 Ammo
Topic: 416 Barrett Hollow Point Bullet In Stock
Replies: 9
Views: 10835

Re: 416 Barrett Hollow Point Bullet In Stock

Randy

They look very nice.

These bullets are they designed for expansion?

If you get a chance I would like to see how they fly on paper.

Ian
by flyjets
Thu 01 Sep, 2011 9:08 pm
Forum: Reloading
Topic: Full Length Size .338 brass?
Replies: 8
Views: 12342

Re: Full Length Size .338 brass?

Zeb Sinclair International sells a shoulder Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to ...
by flyjets
Mon 29 Aug, 2011 8:49 pm
Forum: Reloading
Topic: Full Length Size .338 brass?
Replies: 8
Views: 12342

Re: Full Length Size .338 brass?

Try Annealing the Necks it's possible the Brass is springing back after full length resizing.

I run my 338 Lapua very hard and I also have to Trim the cases after every firing because of the pressure I am running.

Ian
by flyjets
Tue 02 Aug, 2011 9:21 pm
Forum: Reloading
Topic: 50 BMG Concentricity - What are folks doing?
Replies: 5
Views: 3754

Re: 50 BMG Concentricity - What are folks doing?

Skeeter There is no need to point Pistol rounds the guns while accurate for Pistols are no where near the accuracy of a rifle. The Round in the Video was seated to 5.770 OAL this is allowing a small jump on my chamber. The Bullets neck tension is set by the Reloading die so the Bersin tool is actual...
by flyjets
Tue 02 Aug, 2011 8:11 pm
Forum: Show & Tell
Topic: M99 shooting 600 yards sub MOA
Replies: 7
Views: 5232

Re: M99 shooting 600 yards sub MOA

Kevin

I am not a facebook guy haven't setup and account but if you guys want to use it feel free.

Ian
by flyjets
Mon 01 Aug, 2011 3:49 pm
Forum: Show & Tell
Topic: M99 shooting 600 yards sub MOA
Replies: 7
Views: 5232

Re: M99 shooting 600 yards sub MOA

Thanks Bad Rat
by flyjets
Sun 31 Jul, 2011 7:49 pm
Forum: Multimedia Room
Topic: You Guys will Enjoy this Video
Replies: 5
Views: 4428

You Guys will Enjoy this Video

Today my Buddy in NC sent me this link.

http://www.wimp.com/glockammo/

I think you will find it interesting.

Ian
by flyjets
Sun 31 Jul, 2011 7:45 am
Forum: Show & Tell
Topic: Concentricty using Bersin Tool
Replies: 0
Views: 986

Concentricty using Bersin Tool

Bersin tool pointing Bullets.

Here is how you can fix run out errors in your hand loads.

http://www.youtube.com/watch?v=r5ZTUksBbBY&NR=1

Ian
by flyjets
Sun 31 Jul, 2011 7:43 am
Forum: Show & Tell
Topic: M99 shooting 600 yards sub MOA
Replies: 7
Views: 5232

M99 shooting 600 yards sub MOA

I have never filmed myself shooting before but here goes.

My M99 shooting 600 yards with hand loads shooting sub MOA.

http://www.youtube.com/watch?v=VrzN0u_znvg

Ian
by flyjets
Sun 31 Jul, 2011 2:21 am
Forum: Reloading
Topic: 50 BMG Concentricity - What are folks doing?
Replies: 5
Views: 3754

Re: 50 BMG Concentricity - What are folks doing?

I made this Video up for those interested.

http://www.youtube.com/watch?v=r5ZTUksBbBY

Ian
by flyjets
Sun 31 Jul, 2011 1:52 am
Forum: Scopes & Mounts
Topic: Spotting scope
Replies: 4
Views: 3077

Re: Spotting scope

Here is an excellent article on what to look for.

http://www.accurateshooter.com/optics/s ... rformance/

This article is a review of scopes.

http://www.accurateshooter.com/optics/spotting-scopes/

Ian

Go to advanced search